An Instant Pot or similar multi-cooker is one of the easiest ways to make yogurt at home, because it handles both the heating step and the long, warm incubation. If you already own one, you may not need a separate machine (see whether you really need a yogurt maker).
What you need
- Milk: 1/2 gallon to 1 gallon, depending on your pot size. Whole milk gives the thickest, creamiest result. 2% works, and skim usually gives a thinner yogurt.
- Starter: about 2 tablespoons of plain yogurt with live and active cultures per quart of milk, or a packet of yogurt starter culture. Many recipes use a total of 1/4 cup for a gallon; follow the starter’s directions if you use a packet.
- Equipment: an Instant Pot with a Yogurt button, an instant-read thermometer, a whisk, and (for Greek yogurt) a fine strainer or cheesecloth.
A note on Instant Pot Rio models
On many Instant Pot models, including the Rio, the process is controlled with the Yogurt button, which cycles between a Boil mode (for heating the milk) and incubation settings, typically labeled Low, Medium or similar. The exact wording and options vary by model, and some Rio sub-models, such as certain retailer-specific versions, may not include a dedicated Yogurt button. Check your manual or display before you start. If your pot has no Yogurt function, see the section further down.
Step-by-step yogurt
- Heat the milk. Pour the milk into the inner pot and put the lid on. Press Yogurt and adjust until the display shows Boil, then start. Heating a half gallon to about 180°F to 185°F (82°C to 85°C) commonly takes 20 to 30 minutes or more, depending on quantity.
- Cool the milk. When the cycle finishes, lift out the inner pot and let the milk cool to about 105°F to 115°F (40°C to 46°C). You can set the pot in a sink of cool water to speed this up. Stir occasionally so the top does not form a thick skin.
- Add the starter. Whisk the starter into a ladle of warm milk in a separate bowl until smooth, then stir it into the rest of the milk gently but thoroughly.
- Incubate. Put the inner pot back in the base, close the lid, press Yogurt and select the incubation setting. Set the time for 8 to 12 hours. Eight hours gives a milder, softer yogurt, while 10 to 12 hours is tangier and a bit firmer. Some people go longer, but the yogurt gets more sour.
- Chill. When the timer ends, refrigerate the yogurt for at least 4 hours, or overnight, without stirring. It will thicken further as it cools.
Always use clean equipment and fresh milk, and discard any batch that smells off or shows pink, orange or fuzzy growth.
Turning it into Greek yogurt
Greek yogurt is regular yogurt with some of the whey drained away.
- Line a fine-mesh strainer or colander with cheesecloth (or a clean cloth or coffee filters) and set it over a bowl.
- Spoon in the chilled yogurt and cover it.
- Refrigerate and let it drain for about 2 to 4 hours for a thick yogurt. Longer straining gives something closer to soft cheese.
- Scrape the thickened yogurt into a container and stir.
How much does a half gallon make? It depends on how long you strain it. As a rough guide, a half gallon of milk makes about two quarts of yogurt, and straining to a Greek-style thickness commonly removes around a third to a half of that volume as whey. Treat that as an estimate rather than an exact figure.
What to do with whey: keep it refrigerated and use it in baking, smoothies or soups, or as a starter for some other ferments.
Temperatures that matter
- About 180°F (82°C) for heating. Heating milk to this range changes its proteins so the yogurt sets thicker and smoother. Most recipes call for 180°F to 185°F.
- 105°F to 115°F (40°C to 46°C) when adding starter. Starter cultures are sensitive to heat. Milk that is too hot can kill them and the milk will not set, so check with a thermometer instead of guessing. Many sources say the cultures start to be harmed once milk is much above the mid-110s Fahrenheit.
- Cold milk slows everything. If the milk is too cool, incubation takes longer or may stall.
Ultra-pasteurized milk has already been heated, and some cooks skip the heating step with it, going straight to warming and incubating. Results vary, so a small test batch is a good idea.
If your Instant Pot has no yogurt button
You can still do it with a bit more attention:
- Heat the milk on the Saute setting to about 180°F, stirring often so it does not scorch.
- Cool to 105°F to 115°F and stir in the starter.
- Keep the milk warm. Use the Keep Warm setting intermittently, checking that the temperature stays roughly between 100°F and 115°F, or wrap the pot in a towel and place it somewhere warm.
- Check after 8 hours.
If you struggle to hold a steady temperature, a slow cooker or a sous vide setup may be easier.
How to make yogurt thinner or thicker
- To make it thinner: use a bit less starter, stop incubating earlier, avoid straining, or whisk the finished yogurt to loosen it. Lower-fat milk also sets thinner.
- To make it thicker: use whole milk, hold the milk near 180°F for a little longer, let it chill fully, strain it, or stir in a small amount of powdered milk before incubating.
Is it worth making yogurt in an Instant Pot?
For many households, yes. You typically need only milk and a spoonful of starter, and the savings come from buying milk by the half gallon instead of tubs of yogurt. The trade-off is time: most of it is hands-off, but the total including heating, cooling, incubation and chilling is often 12 to 16 hours. For other options, see our guide on how long homemade yogurt takes and the slow cooker method.
Storage
Keep homemade yogurt in clean, covered containers in the fridge. It is commonly said to keep for about one to two weeks, becoming tangier over time. Save a few tablespoons of a good batch as the starter for the next one, and start with fresh commercial starter if batches begin to turn out thinner.