The short answer
For 1 gallon of milk, a typical amount of plain yogurt starter is about 1/4 cup to 1/2 cup (4 to 8 tablespoons) of plain yogurt with live, active cultures. A common rule of thumb is about 2 tablespoons per quart, which works out to 1/2 cup per gallon. If you are using a freeze-dried starter, follow the instructions on the packet instead of converting to tablespoons.
Why sources give different amounts
You will see a lot of numbers for a gallon, and they really do differ:
- Some recipes say about 1/4 cup (4 tablespoons) per gallon.
- Others use 1/3 to 1/2 cup per gallon.
- At least one popular recipe uses 1/2 cup per half gallon, which is about 1 cup per gallon.
These all produce yogurt. The bacteria multiply as the milk incubates, so a small starting amount works, and a larger amount mainly gets things going a bit faster. How active your starter is, how warm you keep the milk and how long you let it incubate all affect the result more than the exact spoonful.
If you want one number to start with, use 1/2 cup per gallon of fresh plain yogurt, then adjust next time based on how it sets.
Amounts by starter type
Plain yogurt
- Per quart: about 2 tablespoons
- Per half gallon: about 1/4 cup
- Per gallon: about 1/2 cup (some cooks use as little as 1/4 cup, and some use up to a cup)
Use plain, unsweetened yogurt with live and active cultures, and a recent expiry date. If you are using homemade yogurt from your last batch, 2 to 4 tablespoons per quart is common. Our guide to yogurt starter cultures explains what to look for.
Freeze-dried starter
Freeze-dried starters are formulated for a specific volume of milk, and different brands vary. Some are sized for a quart or half gallon, and some makers say the same amount works across batch sizes. Read the packet. If it says one packet makes a certain number of quarts, you may need more than one packet for a gallon. When in doubt, follow the manufacturer’s directions rather than a general rule.
Heirloom or saved starter
For heirloom cultures that you re-culture, use the amount the supplier recommends. Many suggest a few tablespoons of your last batch per quart. Keep your seed culture in a separate jar. More tips are in yogurt starter cultures.
How to mix the starter into a gallon
- Heat your milk, then cool it to about 105 to 115°F (40 to 46°C). If the milk is hotter, it can kill the cultures. See the full method in how to make yogurt at home.
- Scoop a ladleful of warm milk into a bowl and add your starter. Whisk until smooth.
- Pour the mixture into the pot of milk and stir gently but thoroughly, so it is evenly distributed through the gallon.
- Pour into clean jars, cover and incubate undisturbed.
Tempering the starter in a small amount of milk first prevents clumps and helps it spread evenly.
What happens with too little or too much
- Too little: the yogurt may take longer to set, and with a very small amount of weak starter it may not set well. Slow starts also give unwanted bacteria more time to compete.
- Too much: you don’t get much benefit. Extra starter may make the yogurt a bit more sour sooner, and it can use up your supply faster. It isn’t harmful, but it is unnecessary.
If a batch doesn’t set, look at temperature and starter freshness before blaming the amount. See the common mistake when making yogurt.