Probiotic Yogurt

What temperature for L-reuteri yogurt?

L. reuteri yogurt ferments best at about 97-100°F (36-38°C). See why, how to check your yogurt maker, and what to do if your batch won't set.

On this page
  1. Short answer
  2. Why the temperature is lower than regular yogurt
  3. Temperatures for each stage
  4. Checking your yogurt maker
  5. Ways to hold the temperature
  6. Signs the temperature was off
  7. Related guides

Short answer

L. reuteri yogurt is generally fermented at about 97–100°F (36–38°C), usually for around 36 hours. Many people aim for 98–99°F. Keep it below about 109°F (43°C), since higher heat can damage or kill the bacteria.

Why the temperature is lower than regular yogurt

Conventional yogurt cultures (S. thermophilus and L. bulgaricus) work at higher temperatures, and most yogurt makers and Instant Pot yogurt settings are built around them. L. reuteri grows best near body temperature. Dr. William Davis states that die-off begins at roughly 115°F (46°C), with the organism nearly wiped out by about 120°F (49°C). Retailers who sell starters give somewhat more conservative limits, so treat 100°F as the target and stay well below 109°F.

Temperatures for each stage

Stage Typical guidance
Heating ordinary pasteurized milk About 180°F (82°C) for 20 to 30 minutes (some use up to 195°F for 10 minutes)
Before adding the starter Cool below about 107°F (42°C). One retailer suggests 95°F (35°C) or below.
UHT / ultra-pasteurized milk No heating needed; it can often go in cold from the fridge
Fermentation 97–100°F (36–38°C), about 36 hours
After fermentation Refrigerate at least 6 hours

Heating fresh milk first helps the proteins set and reduces competing bacteria. Milk that is too hot when you add the starter can kill it.

Checking your yogurt maker

Many yogurt makers differ from the temperature on their display, and some conventional models and Instant Pots run too hot for L. reuteri. Before your first batch:

  1. Fill the jar with water to roughly the volume of a batch.
  2. Set the device to your target temperature and let it run for a few hours.
  3. Measure the water with a thermometer.
  4. Adjust the setting, or choose another device, if it is outside 97–100°F.

Luvele’s digital model, for example, is set to 96°F (36°C) in their instructions, which shows that the display setting you choose can differ from the “ideal” number.

Ways to hold the temperature

  • Yogurt maker with adjustable temperature, the easiest option.
  • Sous vide cooker in a water bath with a container.
  • Instant Pot, only if you can manually set it in the right range.
  • Oven trick, described by Davis for dairy: turn the oven on to a high setting for about 60 to 90 seconds, turn it off, and repeat every 4 to 6 hours. It is imprecise, and he warns coconut milk needs more precise control.

Keep the jar away from drafts, vents and fans.

Signs the temperature was off

  • No thickening after 12–16 hours: the device may be too hot, killing the culture. Check with a thermometer.
  • Very thin or separated first batch: often normal; it can also point to heating or temperature problems.
  • Very slow: it may be too cool.

The complete guide to probiotic yogurt

How to Make Probiotic Yogurt from Capsules
Read the guide

Keep exploring

Guides from other topics

All topics →